Publications - CASMaT

Understanding the mechanical response of glass and carbon fibres: stress-strain analysis and modulus determination

Kumar, Rajnish ; Mikkelsen, Lars P. ; Lilholt, Hans ; Madsen, Bo
in: IOP Conference Series: Materials Science and Engineering, vol: 942, issue: 1
Presented at: 41st Risø International Symposium on Materials Science

Type: Conference article (Peer reviewed)

Status: Published | Year: 2020 | DOI: https://doi.org/10.1088/1757-899X/942/1/012033

X-ray tomography based numerical analysis of stress concentrations in non-crimp fabric reinforced composites - assessment of segmentation methods

Auenhammer, R. M. ; Mikkelsen, L. P. ; Asp, L. E. ; Blinzler, B. J.
in: IOP Conference Series: Materials Science and Engineering, vol: 942, issue: 1
Presented at: 41st Risø International Symposium on Materials Science

Type: Conference article (Peer reviewed)

Status: Published | Year: 2020 | DOI: https://doi.org/10.1088/1757-899X/942/1/012038

Adobe specimens of Greenlandic fine-grained rock material

Bertelsen, I.M.G. ; Belmonte, L.J. ; Ottosen, L.M.
Presented at: 3^rd International Conference on Bio-Based Building Materials

Type: Paper (Peer reviewed)

Status: Published | Year: 2019

Aging of 3D-printed maraging steel

Thorsteinsdóttir, E. G. ; Primdahl, D. S. ; Zhang, Y. B. ; Juul Jensen, D. ; Yu, T.
in: I O P Conference Series: Materials Science and Engineering, vol: 580, issue: 1
Presented at: 40th Risø International Symposium on Material Science: Metal Microstructures in 2D, 3D, and 4D

Type: Conference article (Peer reviewed)

Status: Published | Year: 2019 | DOI: https://doi.org/10.1088/1757-899x/580/1/012047

An efficient method to improve the spatial resolution of laboratory X-ray diffraction contrast tomography

Fang, H. ; Juul Jensen, D. ; Zhang, Y.
in: I O P Conference Series: Materials Science and Engineering, vol: 580, issue: 1
Presented at: 40th Risø International Symposium on Material Science: Metal Microstructures in 2D, 3D, and 4D

Type: Conference article (Peer reviewed)

Status: Published | Year: 2019 | DOI: https://doi.org/10.1088/1757-899x/580/1/012030

Characterization of coal bio ash from wood pellets and low-alkali coal fly ash and use as partial cement replacement in mortar

Sigvardsen, Nina Marie ; Ottosen, Lisbeth M.
in: Cement and Concrete Composites, vol: 95, pages: 25-32

Type: Journal article (Peer reviewed)

Status: Published | Year: 2019 | DOI: https://doi.org/10.1016/j.cemconcomp.2018.10.005

Characterization of crack formation and development in the oil&gas well casing cement sheath

Paegle, I. ; Marcos-Meson, V. ; Fischer, G.
in: I O P Conference Series: Materials Science and Engineering, vol: 660, issue: 1
Presented at: 4th International Conference “Innovative Materials, Structures and Technologies”

Type: Conference article (Peer reviewed)

Status: Published | Year: 2019 | DOI: https://doi.org/10.1088/1757-899x/660/1/012063

Crack formation within a Hadfield manganese steel crossing nose

Dhar, Somrita ; Danielsen, Hilmar K. ; Fæster, Søren ; Rasmussen, Carsten ; Zhang, Yubin ; Juul Jensen, Dorte
in: Wear, vol: 438

Type: Journal article (Peer reviewed)

Status: Published | Year: 2019 | DOI: https://doi.org/10.1016/j.wear.2019.203049

Damping analysis of cylindrical composite structures with enhanced viscoelastic properties

Kliem, Mathias ; Høgsberg, Jan Becker ; Vanwalleghem, Joachim ; Filippatos, Angelos ; Hoschützky, Stefan ; Fotsing, Edith-Roland ; Berggreen, Christian
in: Applied Composite Materials, vol: 26, issue: 1, pages: 85-113

Type: Journal article (Peer reviewed)

Status: Published | Year: 2019 | DOI: https://doi.org/10.1007/s10443-018-9684-2

Discarded nylon fishing nets as fibre reinforcement in cement mortar

Ottosen, Lisbeth M. ; Svensson, Simon S. ; Bertelsen, Ida M.G.
part of: Waste Management and the Environment IX, pages: 245 - 256, 2019

Type: Book chapter (Peer reviewed)

Status: Published | Year: 2019 | DOI: https://doi.org/10.2495/WM180231